custom examples

Internal view of a snake box, wired with Mogami multi-channel cable, with protective color-coded heat-shrink which provides strain relief.

Custom wired with((pSYONIC)) Labs cabling made from Mogami #2524 guitar cable. 8 discrete fX loops, switchable through an Octa-Switch.

For a large live venue, this is one of the wall panels on stage, mounted inside the wall. the audio cable is fed through conduit to the stage input boxes back-stage. All color-coded to represent the panel it is attached to when joined with many other panels at the input rack.

Quick, tour-grade disconnect for a custom multi-channel snake box.

A custom panel made to go in the stage floor of a live venue, incorporating mic inputs as well as returns.

Custom 18/6 multi-channel audio snake, with color-coded heat-shrink to show different groups of channels for fast setup.

Rear view of an off-stage rack, housing remote input boxes for front-of-house connections. Incorporating tie lines from several panels across the stage, all color-coded to each individual input panel or return channels.

Custom drum snake with ELCO quick-disconnect. Precise measured lengths of cable channels going to each drum mic on one end of the snake. The other end goes to a gear rack full of preamps and FX. Super fast set-changes and setup.

Custom snakes made for a live touring rig. Acting as quick-disconnects off of the rack-mounted console for efficient and fast setup and tear-down. Custom color-coded to client's specifications.

Custom wired with((pSYONIC)) Labs cabling made from Mogami #2524 guitar cable. 8 discrete fX loops, switchable through an Octa-Switch.

Internal view of a snake box, wired with Mogami multi-channel cable, with protective color-coded heat-shrink which provides strain relief.

Custom audio/video/data panel in the tracking room. Audio channels wired to DB25 connectors on the control room side, for easy connection to the patchbays.

An 8-channel input snake, going into a DB25 connector. The customer had the long portion of XLR's coming from the outputs of a permanently racked device to inputs #5-8, then wanted short input channels near the device with the DB25 for easy switching out of different connections for inputs #1-4.

Part of the COPPERHEAD Series Snake System. A long multi-channel trunk with DB25 connectors, which allows different variations of Tails to be interchanged, depending on the situation.